Skip to content
arcanflamearcanflame

installation of the ven'n fireplace drawer

Installation of the Ven'n fireplace drawer

step 1.: when positioning the drawer, leave space for the fiberglass mesh and plastering

image about positioning the fireplace drawer for plastered fireplace

step 2.: level the drawer by the 4 legs with the wrench attached to the packaging

image about leveling the drawer during the installation

step 3.: Fixing the legs with glue. The fixing winglets have to be covered by the glue.

image about fixing the fireplace drawer with glue

Ven'n can also be built into fireplaces that are covered with ceramic, stone or other materials. In cases like these the setup of the drawer has to be changed.

step 1.: Open the drawer

image about opening the fireplace drawer

step 2.: Loosen up the bolts inside the drawer

image about loosening up the bolt inside the ven'n drawer

step 3.: Pull out the drawer until knocking

image about pulling out the drawer until it is knocking

 step 4.: Tighten the bolts

image about tightening the bolts inside the drawer

step 5.: Close the drawer

image about the closed ven'n with the setup for ceramic cover

Pay attention when covering the fireplace to keep at least 6 mm gap for the push-open movement!

image about the ven'n fireplace drawer covered with techstone